A1192 INTERNATIONAL AGREEMENTS OTHER THAN TREATIES [61 STAT. SCHDUIJ XX - UNITED STATES OF AMERICA Part I (continued) Tariff Act of 1930, para- -- -- m 3°0 304 304 M M Description of Products Steel ingots, cogged ingots, blooms and slabs, by whatever process made: Valued at not above 1-1/2 cents per pound ... Valued above 1-V/2 and not above 2-1/2 cents per pound ................................... Valued above 2-1/2 and not abo"o 5 cents per pound .............. ... ... .. .... ., .. .. Valued above 16 cents per pound ............. Die blocks or blanks; shafting; pressed, sheared or stamped shapes, not advanced in value or con- dition by anr process or operation subsequent to the process of stamping; hammer molds or swaged steel; gun-barrel molds not in bars; concrete reinforcemont bars; all descriptions and shapeos of dry sand, loam, or iron molded steel castings sheets and plates and st-el not specially pro- vided for; all the foregoing: Valued at not above 1-1/2 cents per pound ... Valued above 1-1/2 and not above 2-1/2 cents per pound ................................. Valued above 2-1/2 and not above 5 cents per pound .................................. Valued above 16 cent- per pound ............ The additional duty on all steel circular saw plates undor the first proviso to paragraph 304, Tariff Act of 1930, shall be ................... Billets and bars, whothe solid or hollow (except hollow bars and hollow drill stil valued above 4 cents per pound): Valued at not above 1-1/2 cents per pound ... Valued above 1-1/2 and not above 2-1/2 cents per pound: Weighing not more than 30 pounds per linerr foot . ...................... Weighing more than 30 pounds per linear foot ................................ Valued above 2-1/2 fnd not above 5 cents per pound ................................... Valued above 16 cents per pound ............ Rate of Duty 1/M8per lb. 3/164 per Ib. l% ad val. 15% ad vaw 1/8d per lb. 1/54 per lb. 0l ad val. 12i ad val. 2/4 per lb. V/84 par lb. 1/54 per lb. 3/160 per lb. IlC%ad al. 1 ad vaL.
�
