consistent with the power of continuing at the same rate."[1] Horner, therefore, came to the conclusion that a reduction of the working hours below twelve would necessarily diminish production.[2] He himself, ten years later, cites his opinion of 1845 in proof of how much he under-estimated in that year the elasticity of machinery, and of man's labour-power, both of which are simultaneously stretched to an extreme by the compulsory shortening of the working day.
We now come to the period that follows the introduction of the Ten Hours' Act in 1847 into the English cotton, woollen, silk, and flax mills.
"The speed of the spindles has increased upon throstles 500, and upon mules 1000 revolutions a minute, i.e., the speed of the throstle spindle, which in 1839 was 4500 times a minute, is now (1862) 5000; and of the mule spindle, that was 5000, is now 6000 times a minute, amounting in the former case to one-tenth, and in the second case to one-fifth addition increase."[3] James Nasmyth, the eminent civil engineer of Patricroft, near Manchester, explained in a letter to Leonard Horner, written in 1852, the nature of the improvements in the steam-engine that had been made between the years 1848 and 1852. After remarking that the horse-power of steam-engines, being always estimated in the official returns according to the power of similar engines in 1828,[4] is only nominal, and can serve only as an index of their real power, he goes on to say: "I am confident that from the same weight of steam-engine machinery, we are now obtaining at least 50 per cent. more duty or work performed on the average, and that in many cases the identical steam-engines which in the days of the restricted speed of 220 feet per minute, yielded 50 horse-
- ↑ Rep. of Insp. of Fact. for Quarter ending 30th September, 1844, and from 1st October, 1844, to 30th April, 1845. p. 20.
- ↑ l.c., p. 22.
- ↑ "Rep. of Insp. of Fact. for 31st October, 1862," p. 62.
- ↑ This was altered in the "Parliamentary Return" of 1862. In it the actual horse-power of the modern steam-engines and water-wheels appears in place of the nominal. The doubling spindles, too, are no longer included in the spinning spindles (as was the case in the "Returns" of 1839, 1850, and 1856); further, in the case of woollen mills, the number of "gigs" is added, a distinction made between jute and hemp mills on the one hand and flax mills on the other, and finally stocking-weaving is for the first time inserted in the report.
