stone on which the English needle manufacture was raised. But while in Nuremberg that single artificer performed a series of perhaps 20 operations one after another, in England it was not long before there were 20 needlemakers side by side, each performing one alone of those 20 operations; and in consequence of further experience, each of those 20 operations was again split up, isolated, and made the exclusive function of a separate workman.
The mode in which manufacture arises, its growth out of handicrafts, is therefore twofold. On the one hand, it arises from the union of various independent handicrafts, which be come stripped of their independence and specialised to such an extent as to be reduced to mere supplementary partial processes in the production of one particular commodity. On the other hand, it arises from the co-operation of artificers of one handicraft; it splits up that particular handicraft into its various detail operations, isolating, and making these operations independent of one another up to the point where each becomes the exclusive function of a particular labourer. On the one hand, therefore, manufacture either introduces division of labour into a process of production, or further developes that division; on the other hand, it unites together handicrafts that were formerly separate. But whatever may have been its particular starting point, its final form is invariably the same—a productive mechanism whose parts are human beings.
For a proper understanding of the division of labour in manufacture, it is essential that the following points be firmly grasped, First, the decomposition of a process of production into its various successive steps coincides, here, strictly with the resolution of a handicraft into its successive manual operations. Whether complex or simple, each operation has to be done by hand, retains the character of a handicraft, and is therefore dependent on the strength, skill, quickness, and sureness, of the individual workman in handling his tools. The handicraft continues to be the basis. This narrow technical basis excludes a really scientific analysis of any definite process of industrial production, since it is still a condition that each detail process gone through by the product must be capable of
