Of Sgraffito Work.
set as hard and homogeneous as stone, and as damp-proof as the nature of things permits.
The three coats above referred to may be gauged as follows:—
Coarse Coat.—2 or 3 of sharp clean sand to 1 of Portland, to be laid about ¾ inch in thickness. This coat is to promote an even suction and to keep back damp.
Colour Coat.—1 of colour to 1½ of old Portland, to be laid about ⅛ inch in thickness. Specially prepared distemper colours should be used, and amongst such may be mentioned golden ochre, Turkey red, Indian red, manganese black, lime blue, and umber.
Final Surface Coat.—Aberthaw lime and selenitic cement, both sifted through a fine sieve—the proportions of the gauge depend upon the heat of the lime: or, Parian cement sifted as above—air-
